Articles in Category: Blog
Raspberry Pi 2 / Kodi remote control with LIRC
Here is how you get any control remote, old or new, to work with OSMC/Kodi on the raspberry pi 2, or any other raspberry really.
Rescue AVR with HV rescue arduino shield
After locking myself "out" of the atmega328p by writing the wrong fuses thru SPI programming, i decided to give a try on the Arduino-based AVR High Voltage Programmer, it was a good bet in the end.
Linux terminal only PIC programming
Finally after a lot of reading and some test and trial, i came up with a setup to program the PIC16F88 using only the terminal command line.
PIC-18 Break-out with ICSP
I needed to make a small test on some old chips i had, so i came up with a quick hour and half, break-out board for most PICs DIP-18 sockets. I also included an ICSP header.
Counter Project recoded in C
DIY Breadboard jumper wire
IRC server + SSL + Services , how to build your own
How to build your own IRC server with services like, nickserv, chanserv etc, and a secure encrypted connection with SSL, you can build a secure chating environment away from unwanted eyes and smart ass agencies.
How to install Debian 7.1 wheezy
Comparison of diferent 16F88 compilers
Chosing the right compiler to use in the future can be a lot of work sometimes, especially for those who like to take time in this decisions.